========================
La serie LIVE se impone gracias a sus diferentes configuraciones, potencias y su escaso peso.
========================
El V1226 de la Serie LIVE, es un sistema activo, tri-amplificado para giras en pequeños y medianos eventos, tanto en interiores como exteriores. Dispone de un altavoz de 12” para bajos, dos altavoces de 6,5” para frecuencias medias y tres motores de compresión de 1” EMINENCE. La guía de ondas consigue una dispersión de 140⁰. La amplificación integrada de 3000W y clase D, entrega una excelente claridad de reproducción hasta 140 dB de presión sonora máxima. Teniendo en cuenta su potencia, su peso es muy reducido para facilitar el manejo y el colgado.
DATOS TÉCNICOS | |
| Speaker Type | 3-way active Line Array Module |
| DATOS ACÚSTICOS | |
| Frequency Response | 64-18,000 Hz +/-3dB |
| Max SPL | 134 dB |
| Peak SPL | 140 dB |
| HF | 3×1″ |
| MF | 2×6,5″ |
| LF | 1×12″ |
| Voice Coil MF | 1,5″ |
| Voice Coil LF | 4″ |
| Horizontal Directivity | 140° |
| Vertical Directivity | Depending on array size and configuration |
| AMPLIFICADOR | |
| Amp Class | Class D |
| RMS Power | 1200 W + 300+ 150 W |
| Peak Power | 3000 W +1200+ 600 W |
| Cooling | Convection |
| Power Supply | 90V-264V Wide Operating Voltage |
| Protection | DC, Short Circuit , Overload Protection, excess heat |
| PROCESADOR | |
| Controller | DSP 56 bit |
| AD/DA Converter | AKM 24 bit/48 KHz |
| Limiter, compressor, EQ, delay | |
| Dual Active Multiband Peak, RMS , Thermal | |
| Processing (filters) | Butterworth, Bessel, Linkwitz-Riley |
| SECCIÓN DE ENTRADA | |
| Signal Input | 1xXLR fem, balanced |
| Signal Output | 1xXLR male, balanced |
| USB | USB connector IN/OUT |
| Power Socket | 1x PowerCON IN |
| 1x PowerCON OUT | |
| Housing | Multiplex Plywood, 15 mm (0,59 in) |
| Finish | Polyurea painted black |
| Rigging Points | Integrated rigging hardware |
| DIMENSIONES | |
| Width | 610 mm |
| Height | 370 mm |
| Depth | 215 mm |
| Weight | 21 Kg |
DSP-Lite es una placa de procesamiento con 2in/3out , que integra un panel de interfaz compatible con mono-in / link-out o stereo-in. Además se pueden configurar 4 memorias.Con convertidores A-D/D-A de AKM de 24 bit @ 48Khz. Con una arquitectura Analog Devices SigmaDSP® 50 MIPS y una precisión interna de 56 bit.
=========================
V4626
1.150 W (RMS)
=========================
| DATOS TÉCNICOS |
| Speaker Type |
| DATOS ACÚSTICOS |
| Frequency Response |
| Max SPL |
| Peak SPL |
| HF |
| MF |
| LF |
| Voice Coil MF |
| Voice Coil LF |
| Horizontal Directivity |
| Vertical Directivity |
| AMPLIFICADOR |
| Amp Class |
| RMS Power |
| Peak Power |
| Cooling |
| Power Supply |
| Protection |
| PROCESADOR |
| Controller |
| AD/DA Converter |
| Processing (filters) |
| SECCIÓN DE ENTRADA |
| Signal Input |
| Signal Output |
| USB |
| Power Socket |
| Housing |
| Finish |
| Rigging Points |
| DIMENSIONES |
| Width |
| Height |
| Depth |
| Weight |
| 3-way active Line Array Module |
| 80-20,000 Hz +/-3dB |
| 136 dB |
| 142 dB |
| 3×1″ |
| 2×6.5″ |
| 4×6.5″ |
| 1,5″ |
| 2″ |
| 140° |
| Depending on array size and configuration |
| Class D |
| 700 W + 300 + 150 W |
| 2800 W + 1200 + 600 W |
| Convection |
| 90V-264V Wide Operating Voltage |
| DC, Short Circuit , Overload Protection, excess heat |
| DSP 56 bit |
| AKM 24 bit/48 KHz |
| Limiter, compressor, EQ, delay |
| Dual Active Multiband Peak, RMS , Thermal |
| Butterworth, Bessel, Linkwitz-Riley |
| 1xXLR fem, balanced |
| 1xXLR male, balanced |
| USB connector IN/OUT |
| 1x PowerCON TRUE1 IN |
| 1x PowerCON TRUE1 OUT |
| Multiplex Plywood, 15 mm (0,59 in) |
| Polyurea painted black |
| Integrated rigging hardware |
| 610 mm (23,6 in) |
| 370 mm (14,6 in) |
| 215 mm (8,46 in) |
| 21 Kg (46 lbs) |